DHT-183 heat resistant rubber conveyor belts china factory
Packaging: | (1) PP waterproof cloth+Steel core +Side plastic sheet (2) Can be packed as per customer requirement (3) Usually can load 10-20 rolls into one 40HC container |
---|---|
Brand: | TLT |
Place of Origin: | Hebei, China (Mainland) |
Basic Info
Model No.: DHT-183
Product Description
DHT-183 heat resistant Rubber Conveyor Belts china factory
name | conveyor belts china | |
Model | DHT-179 | |
Features and application: Nylon conveyor belts has a advantages of high strength,good flexibility,impact resistant,light weight,good groove. Besides the advantages of Nylon Conveyor Belt,the unique of EP conveyor belt is low elongation,wet strength not to lower totally,which is especially important to long distance transportation and in the wet condition.
| Conveyor belt length | As your request |
The workshop process of conveyor belts china
The Data analysis of conveyor belts china
Product Technolgy Specification | ||||||
Belt type | Fabric type | Single fabric strength(N/mm) | Single fabric thickness(N/mm) | the thickness of overburden(mm) Top rubber/ Bottom rubber | Ply | Width Range(mm) |
EP belt | EP100 | 100 | 0.75 | 3.8-8.0/ 1.5-4.5 | 2-10 | 200-2000 |
EP150 | 150 | 0.85 | 2-10 | |||
EP200 | 200 | 1.00 | 2-8 | |||
EP250 | 250 | 1.20 | 2-8 | |||
EP300 | 300 | 1.35 | 2-6 | |||
EP400 | 400 | 1.65 | 2-6 | |||
Nylon belt | NN100 | 100 | 0.70 | 2-10 | ||
NN150 | 150 | 0.75 | 2-10 | |||
NN200 | 200 | 0.90 | 2-8 | |||
NN250 | 250 | 1.15 | 2-8 | |||
NN300 | 300 | 1.25 | 2-6 | |||
NN400 | 400 | 1.50 | 2-6 | |||
Note:The thickness of overburden,ply,width of belts and length of belt can customized as customers' request |
Physical Properties of the coating layer(before aging) | |||
Performance type | Tensile strength/Mpa ≥ | Elongation at break/% ≥ | Abrasion loss/mm³ ≤ |
H | 24 | 450 | 120 |
D | 18 | 400 | 100 |
L | 15 | 350 | 200 |
Note:H is used for transporting on the tape is strongly impair the sharp wear material;D is used for conveying high abrasive material;L is used for conveying moderate wear material.
70°x168h after aging the rate of change about Tensile strength and Elongation at break is ±25%. |
Synthetic fiber skeleton belt minimum adhesive strength | |||
Index item | among the cloth layer | among overburden and cloth layer | |
the thickness of overburden 0.8mm~1.5mm | the thickness of overburden >1.5mm | ||
Average value of all samples N/mm ≥ | 4.5 | 3.2 | 3.5 |
Minimum peak value of all samples N/mm ≥ | 3.9 | 2.4 | 2.9 |
Note:the highest peak of all samples should not exceed 20N/mm. |
The test of conveyor belts china
Hebei Dahua Rubber belt Co., Ltd. is a professional manufacture of various types of conveyor belt, transportation machinery and accessories.
Dahua focus on science and technology development,promise excellent quality on basis of high-quality scientific and technological management team, advanced production equipment, a comprehensive means of detection, strict quality control system.
We have been awarded "the adoption of international standards recognized certificate" by Hebei Technical Supervision, and "Product Certificate" by Hebei Product Quality Supervision, Inspection and the Court. In 2005 , we passed the ISO9001 . Our main products are well welcomed by many countries with its good product quality and good after-sales service, Our products are widely used in coal, metallurgy, ports, electricity, building materials and other production areas.
Product Categories : Rubber Conveyor Belt > NN/EP conveyor belts
Premium Related Products